Polaris Ranger XP HD Crew Diesel 6x6 EV 400 500 700 800 RZR RZRS RZR4 RZR 900 XP, Yamaha Rhino
Can-Am Commander, Honda Big Red MUV, Kawasaki Mule Teryx, Arctic Cat Prowler, Golf Cart
|
|
|
|
|
|
|
|
Turn Signal Kit Custom Brackets and Light Guards
|
|
EZ Turn Signal Kits wanted to help make your install EZ... We designed and developed a few mounting brackets that will help with your installation. You don't need to have these brackets to install any of our kits, but these will help if you don't have a simple way of mounting your turn signal lights.
Example, most mount the front lights on the front bumper, that's simple and EZ... It is also easy to install the lights on the rear bumper, but not everyone has a rear bumper. For those who do not, you can use our custom T-Brackets, they are very easy to use and come with all the hardware.
If you mount any of the lights on the bumpers, T-brackets, or anywhere that they are exposed and could get hit, you might want to get our Light Guards to protect them. Again, they are very easy to install and you can use the existing holes and hardware from your lights.
|
|
|
|
|
|
Polaris Ranger
Front Flare
Brackets
|
|
2009-10 Ranger 500
2009-12 Ranger XP & HD
2010-12 Ranger 800 Crew & 6x6
2011-12 Ranger Diesel & Crew
|
|
Polaris Ranger
Front Flare
Brackets
|
|
|
|
|
|
|
|
|
|
In Stock & Ready to Ship!
|
|
|
|
These heavy duty steel constructed black powder coated Front Flare Brackets (FFB's) will fit the 2009-10 Ranger 500, the 2009-12 Ranger XP & HD, the 2010-12 Ranger 800 Crew & 6x6, and the 2011-12 Ranger Diesel & Diesel Crew. They come with screws for mounting, they are EZ to install using the existing mounting holes and they are on 3" centers, same as all the lights in our kits.
The 2009-2010 Ranger 500, the 2009-2012 Ranger XP & HD, the 2010-2012 Ranger 800 Crew & 6x6, and the 2011-2012 Ranger Diesel Front Flare Brackets look and work great! They come with the screws for mounting to the front flare and the self tapping screws to mount your front turn signal lights. They have 7/64 pre-drilled holes for EZ mounting of the lights. You can install this pair of Front Flare Brackets (FFB) in less than 15 minutes.
|
|
|
<<< click on picture to enlarge >>>
|
|
|
|
|
 
|
|
|
|
|
|
|
|
|
|
|
|
|
In Stock & Ready to Ship!
|
|
|
|
These heavy duty steel constructed black powder coated Rear Mounting T-Brackets w/Screws, can be used with all years, makes & models. They are EZ to install using the existing mounting holes and they are on 3" centers, same as all the lights in our kits.
They will help you mount your rear lights if you do not have a rear bumper. They can be hung from anywhere under the bed of your recreational vehicle. They come with self tapping screws for mounting the T-brackets and the machine screws with nylon lock nuts for mounting the lights to the T-brackets. You can install this pair of T-brackets in less than 10 minutes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In Stock & Ready to Ship!
|
|
|
|
These heavy duty steel constructed black powder coated Light Guards will protect the lights wherever you mount them. They are EZ to install using the existing mounting holes and they are on 3" centers, same as all the lights in our kits.
Most mount the front turn signal lights on the front bumper. These Light Guards not only look good but they will protect the lights. When you or someone accidentally bumps the front of your recreational vehicle, you won’t have to worry; your lights will be protected. You can install this pair of Light Guards in less than 5 minutes.
If you are mounting the rear lights using our T-Brackets, you can use these Light Guards to protect against accidental bumps too. Some have even used these guards as hanging brackets. They are strong and will work however you decide to use them.
|
|
|
|
|
|
|
|
|
|
|
Not what your looking for, checkout these kits:
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office #1: (623) 435-1337
Glendale Office #2: (623) 939-0834
|
|
|
|
|
